Product Description

Specification MAKE: SHIBAURA
MODEL: TD**0/*6S YEAR: ***9
SYSTEM: SIEMENS
TABLE Diameter: ***0mm
Depth of minimum section: **0mm
Diameter of support face: ***0mm
Spindle diameter(main bearing): **0mm (bore dia. of main brg.)
Main drive torque rating, Gear train torque rating: *0,**0kg-m
Bull gear diameter: ***3mm
Bull gear face width: **0mm

CAPABILITY
Max. work piece diameter: ***0mm
Max. work piece height-Under cross rail: ***0mm-
Under ram lead: ***0mm (including tool holder)
Max. work piece weight: *0,**0kg
Main drive horse power: DC *5kW
Vertical travel of cross rail: ***0mm
Horizontal travel of ram head: Right: ***5mm, Left: ***5mm
Vertical travel of ram: Right: ***0mm, Left: ***0mm
Swivel angle of ram head: Right: *0deg (to both sides)""SPEEDS AND FEEDS
Range of table speeds-Infinitely variable: 0.*2 ~ *3rpm-Constant peripheral: AvailableRange of feeds-Cross rail: **0mm/min
Rapid traverse rates-Ram head: ***0mm/min-Ram: ***0mm/min

MACHIINE BASE
Width of base: ***0mm in dia.
Depth of base: **5mmMACHINE FRAME Width over ways of column: **0mm
Number of ways: 2 ways
Width of individual ways: **0mm on each way
Column cross section-At base: depth: ***0mm, width: **0mm-At top: depth: ***0mm,
width: **0mm

TOP CROSS BRACE SECTION-Depth: **0mm-Width: **0mm
CROSS RAIL
Depth of minimum section: **0mm(section of slide ways for vertical traverse)
Length of rail: ***0mm
Width over ways: **0mm
Number of ways: 2 ways
Width of individual ways: upside: **0mm, underside: **0mm
Length and type of saddle bearing on column ways-Length: **5mm-Type: hydrodynamic bearing
RAM HEADS

Depth of minimum section: *0mm
Length and type of saddle bearing on cross rail: **0mm
Cross section of ram-Right: **0x**0mm-Left: **0x**0mm
Length and type of saddle bearing on ram head(Right)-Length: ***0mm-
Type: antifriction way bearing(Left)-Length: ***0mm-Type: hydrodynamic bearing
WEIGHT
Basic machine (total): *7,**0kg
Largest sub assembly (for transport): *0,**0kg (table assembly)
GENERAL NOTES/ OPTIONSNumerical control: Right-FANUC 7T(RETROFITTED WITH SIEMENS **0C)Read out measuring: Included in numerical control unit.